The nesting CNC machine DYNESTIC 7505 enables high efficient panel processing with the newest nesting technology in modern gantry design! With machining dimensions from 3,100 mm in X-direction, and 1,580 mm in Y-direction, the optimised construction facilitates very short processing cycles with the best processing results in the same amount of time.
The nesting CNC processing center is equipped with an integrated 6-position linear tool changer which could perfectly be extended to 12 tool positions. New highlight is an LED machine lettering which displays the operating status of the machine. Depending on the colour of the lettering it is possible to see which is the current operating status of the DYNESTIC 7505.
Moreover the DYNESTIC 7505 has ceramic stored high performance spindles as well as a fully equipped drilling head with up to 24 drilling spindles and grooving saws in X-direction.
Materials that you can use on this machine: Solid timber, laminates such as MDF, plastics and acrylics.
Click here for more information about CNC training/assessments
All training/assessments are to ensure that you are using the machines safely and correctly, overall.
You will be taught how to turn the machines on/off, location of emergency stop, and all safety measures & ground rules for each machine.
Required pre-requisite knowledge:
- Basic computer skills
- Basic understanding and prior experience with CAD-based software (e.g. Adobe Illustrator, AutoCAD, Rhino, Fusion 360, etc.)
- An understanding of how a router is used
Things you will learn in this training:
- Basic training in BZ Work machine software and controls
- Basic training in Campus NC Hops
- Basic geometry creation and editing in AlphaCAM
- Basic 2D machining strategies in AlphaCAM
- Basic Nesting in AlphaCAM
- In-depth look at cutter and drill selection
If you already know how to use the machine, be sure to book an assessment before use. The assessments are put in place for everyone's benefit, so our technicians can oversee that you will use the machines correctly, but most importantly, safely!
|DYNESTIC 7505 - 10.5 classic|
|Machining Dimensions in X direction 3100mm|
|Machining Dimensions in Y direction 1580mm|
|Vector Speed 100m/min|
|Router Unit 8kW, air-cooled, 1000-24000rpm|
|Drilling Head L - 14 spindles (10V|4H) including sawing unit in X direction|
|Workpiece Support - High-flow nesting table with continuous vacuum field (8-field, software controlled)|
|Safety Equipment - Light Grid|
|Tool Changer - 12-position pick up|
|Software - CAMPUS software, BetterNest (free-form nesting), ALPHACAM Ultimate Router|
|GET STARTED TRAINING||£274.80|
|PER HOUR (SUPPORTED)||£43.80|
|PER HOUR (UNSUPPORTED)||£33|
|3+ HOUR DISCOUNT||10%|
|6+ HOUR DISCOUNT||15%|