The powered back gauge allows you to set a depth whilst the sheer’s rake angle is adjustable according gauge depth and required cut length. The foot operated sheer allows you to steady and feed your workpiece double handed.
The machine is fully guarded so that it is not possible to be hit by falling pieces. It has a cut length of 2.5m, will cut aluminium at 5mm, mild steel at 4mm, and stainless at 3mm.
Materials that can be used on this machine: Any metals (max. 6mm thickness/2.5m long)
The Guillotine is accessible to all members who have passed an assessment for it and is one of the shared access metalwork machines.
All training/assessments are to ensure that you are using the machines safely and correctly, overall.
You will be taught how to turn the machines on/off, location of emergency stop, and all safety measures & ground rules for each machine.
Things you will learn in this training:
- Machine controls
- Settings for different material thicknesses
If you already know how to use the machine, be sure to book an assessment before use. The assessments are put in place for everyone's benefit, so our technicians can oversee that you will use the machines correctly, but most importantly, safely!
|Cutting Widths 1350-3050mm|
|Shearing in Mild Steel 2-4mm|
|Cutting Depth Max. 750mm|
|GET STARTED TRAINING||£33|