If you want to saw through an RSJ this is the kit for you. Serviced by an 8-meter run of in-feed off-feed rollers, it has a sliding vice enabling easy placement. It also boasts cutting capacities up to 60° right and 45° left and has an electronic display so you can quickly, easily and accurately set your angle of cut.
The blades on this machine are maintained and changed by our workshop team.
Materials that can be used on this machine: Any metals, plastics (no glass-filled).
The Horizontal Bandsaw is accessible to all members who have passed an assessment for it and is one of the shared access metalwork machines.
All training/assessments are to ensure that you are using the machines safely and correctly, overall.
You will be taught how to turn the machines on/off, location of emergency stop, and all safety measures & ground rules for each machine.
Things you will learn in this training:
- Correct use of speeds
- Angle cutting (up to 60°)
- Use of hydraulic feed
If you already know how to use the machine, be sure to book an assessment before use. The assessments are put in place for everyone's benefit, so our technicians can oversee that you will use the machines correctly, but most importantly, safely!
|Cutting Capacity - Box mm - 90° 300, 45° 240, 60° 170,|
|Cutting Capacity - Square mm - 90° 260, 45° 230, 60° 170,|
|Cutting Capacity - Rectangle mm - 90° 420 x 180, 45° 250 x 180, 60° 170 x 170,|
|Bed Height mm - 830|
|Blade Size mm - 3270 x 27 x 0.9|
|Cutting Speed m/min - 35/70|
|Motor Kw - 0.7 - 1.4|
|Operation - Pull Down/Auto Down Feed|
|Vice - Manual|
|GET STARTED TRAINING||£33|