We chose this HAAS machine for its ease of use and impressive large bed capacity. Its accessible Fanuc control system means its simple to learn on and makes for easy programming.
It comes with an impressive range of functionality and features. The 4 axis features make single operation milling possible. Because the machine has a wider range of movement there's less need to pause an operation cycle to reposition your workpiece and re-clamp it part way through. It comes with a face plate as you might expect but also comes with a chuck which makes holding easier. It's rigid tapping capability makes taps and threads much simpler to cut and its 6000 rpm spindle enables high speed machining.
Materials that you can use on this machine: Metals and plastics (no wood).
You can Train with us to use this machine. Once you’ve passed the training course you can book the machine by the hour and operate it yourself
All training/assessments are to ensure that you are using the machines safely and correctly, overall.
You will be taught how to turn the machines on/off, location of emergency stop, and all safety measures & ground rules for each machine.
Things you will learn in this training:
- Info Coming Soon!
If you already know how to use the machine, be sure to book an assessment before use. The assessments are put in place for everyone's benefit, so our technicians can oversee that you will use the machines correctly, but most importantly, safely!
|Travel Range in X axis 1016mm|
|Travel Range in Y axis 406mm|
|Travel Range in Z axis 406mm|
|Spindle Nose to Table min. 102mm max. 508mm|
|Feed rate Max. Cutting 10.2m/min|
|Max. Tool Diameter 89mm|
|Spindle Speed 6000rpm|
|Max. Torque 45.0Nm @ 1200rpm|
|PER HOUR UNSUPPORTED||£25|
|3+ HOURS DISCOUNT||10%|
|6+ HOURS DISCOUNT||15%|